The GEGO button has different functions:
- When you first receive the device, you need to keep the button pressed to turn it ON, until you see a blinking led light. The activation process may take a couple of minutes, where you will see the green led blinking. Once the activation process is completed, all LED lights will be off.
- After the device has been turned ON and configured, pressing the button will let you verify through the LED lights if the device is working properly, if the battery is too low, or if there is any other issue by doing a short press of the button. Also, if you keep the button pressed for over 5 seconds, you will force the device to report its location right away.